Hallo zusammen,
CMYK-Dichtewerte (Vorgaben) sind nicht Bestandteil der Prozessnormen (z.B. ISO 12647-2).
Für CMYK, RGB, C+M+Y gelten CIELAB-Sollwerte und Toleranzen.
*** Zitat aus ISO 12647-2:2004, 4.3.2.3 Ink set colours:
NOTE 4 Density values can be very valuable for process control during a print run, where
the instrument, the ink and
the print substrate remain the same; see ISO 13656[3]. However, in a general situation,
density values do not define a
colour to the required degree. Therefore, for the purpose of this part of ISO 12647,
reflection density values are only
recommended for the determination of tone values. Following ISO 13656[3], the production
press operator first achieves
the correct colour of the solids on the press, then reads the densities with the
instrument from the OK print. The densities
are then used as aim values for process control during the production run. ***
Tonwertzunahme-Sollwerte von CMY und K (in 5%-Stufen) für die Druckbedingungen/Papiertypen
1-5, SC etc. sind z.B. dem MedienStandard Druck 2008 zu entnehmen. Seite 15, Tabelle 7
www.bvdm.org/Aktuelles/Downloads.php
Freundliche Gruesse
Karl Michael Meinecke
Bundesverband Druck und Medien e.V. (bvdm)
German Printing and Media Industries Federation (bvdm)
Biebricher Allee 79 | D-65187 Wiesbaden
Fon +49(0)611 80 31 68 | Fax +49(0)611 80 32 68
mailto:km@bvdm-online.de | URL
www.bvdm-online.de
ATS | Altona Test Suite Application Kit
www.altonatestsuite.com
NEU | Repro von Farbe | CM in DTP
www.bvdm.org/Publikationen
R16 | roman16 bvdm Reference Images
www.roman16.com
MSD | MedienStandard Druck
www.bvdm.org/Aktuelles/Downloads.php
PMPF| Print Media Production Forum
www.pmpf.de
-----Original Message-----
From: eci-bounces(a)lists.callassoftware.com
[mailto:eci-bounces@lists.callassoftware.com] On Behalf Of
CHRISTOPHER ROWE
Sent: Monday, August 03, 2009 12:56 PM
To: eci(a)lists.callassoftware.com
Subject: Re: [ECI] CMYK-Dichtevorgaben für unterschiedliche Papiere
Hallo Herr Abel,
Das ist eine gute Frage! Die stelle ich mich selber. Kann man
einfach nicht das Proof ausgeben und die Dichten nachmessen?
Leider sind Dichten nicht mehr Mode.
Chris
--- On Mon, 3/8/09, Helmut Abel <helmut_abel(a)yahoo.com> wrote:
From: Helmut Abel <helmut_abel(a)yahoo.com>
Subject: [ECI] CMYK-Dichtevorgaben für unterschiedliche Papiere
To: eci(a)lists.callassoftware.com
Date: Monday, 3 August, 2009, 7:07 AM
Hallo Forum,
wo finde ich Vorgaben oder Referenzwerte von
CMYK-Dichten sowie Tonwertzunahmen für die verschiedenen
Standard Papiere im Offset- und Tiefdruck.
Helmut Abel