12:33 p.m.
Hello Anand!
I am trying to find out whether there is a way to tell
the measure tool and
i1io to skip certain patches and measure only the necessary patches. Is
there any way, I can put some command in the reference file and say measure
only these paches and skip these patches.
As I know, there is no way to measure certain patches and to skip
another patches in strip mode.
I think, there are two solutions for your problem:
1. Take the whole chart readings in iO patch mode, then waste
unnecessary patches.
2. Take measurements by i1 in patch mode.
Best regards,
Alexey Gribunin, UNIT Color Technologies, Moscow, Russia.
1:01 p.m.
New subject: Measuring test chart using profilemaker measure tool and i1io
I agree with Alex. Certain applications, like GMG, do skip the patches that
does not have any black in the CMYK composition, but the patches are skipped
in "software" only, meaning that the application does measure every patch
but, in the software, one the patches are measured, they are ignored or
dropped from the measurements. The best approach is to measure all patches
and then eliminate the patches you do not need either in Excel or by writing
a small program of your own that open the measurement file and only extract
the patch that you need. Feasible but a lot of work.
Best / Roger
-----Original Message-----
From: eci-en-bounces(a)lists.callassoftware.com [mailto:eci-en-
bounces(a)lists.callassoftware.com] On Behalf Of Alexey Gribunin
Sent: 8 octobre 2010 06:34
To: eci-en(a)lists.callassoftware.com
Subject: Re: [ECI-EN] Measuring test chart using profilemaker measure tool
and i1io
Hello Anand!
I am trying to find out whether there is a way to
tell the measure
tool and i1io to skip certain patches and measure only the necessary
patches. Is there any way, I can put some command in the reference
file and say measure only these paches and skip these patches.
As I know, there is no way to measure certain patches and to skip another
patches in strip mode.
I think, there are two solutions for your problem:
1. Take the whole chart readings in iO patch mode, then waste unnecessary
patches.
2. Take measurements by i1 in patch mode.
Best regards,
Alexey Gribunin, UNIT Color Technologies, Moscow, Russia.
_______________________________________________
ECI-EN mailing list
ECI-EN(a)lists.callassoftware.com
http://lists.callassoftware.com/mailman/listinfo/eci-en 
1:19 p.m.
New subject: Measuring test chart using profilemaker measure tool and i1io
Hello,
1. Take the whole chart readings in iO patch mode, then
waste
unnecessary patches.
2. Take measurements by i1 in patch mode.
3. Cut out the text or cover it with white or black tape.
MfG
Thomas Richard
4964
days inactive
4964
days old
eci-en@lists.callassoftware.com
2 comments
3 participants
participants (3)
-
Alexey Gribunin -
Roger Breton -
Thomas Richard