AW: [ECI-EN] (no subject)
27 Apr
2004
27 Apr
'04
9:10 p.m.
Hi Mark,
the comprehensive Altona Test Suite Application Kit is providing Reference
Prints and Test Form files (for all ISO standard printing conditions),
information/documentation on standard values, tolerances (CIELAB, tone value
increase etc.). Altona Test Suite Application Kit is a joint project of
bvdm, ECI, Fogra, ugra based on ISO 12647.
Please go to www.altonatestsuite.com <http://www.altonatestsuite.com> for
further information and order
Freundliche Gruesse - Kind Regards
Karl Michael Meinecke
Bundesverband Druck und Medien e.V. (bvdm)
German Printing and Media Industries Federation (bvdm)
Biebricher Allee 79 | D-65187 Wiesbaden
Postfach 18 69 | D-65008 Wiesbaden
Fon +49(0)611 - 80 31 68 | Fax +49(0)611 - 80 32 68
mailto:km@bvdm-online.de <mailto:km@bvdm-online.de> | URL www.bvdm.org
------------------------------------------------------
NEU NEU NEU - Altona Test Suite Anwendungspaket www.altonatestsuite.de
NEW NEW NEW - Altona Test Suite Application Kit www.altonatestsuite.com
bvdm-Publikationen recherchieren und bestellen http://www.point-online.de
<http://www.point-online.de/>
-----Ursprüngliche Nachricht-----
Von: Mark [mailto:markallington@blueyonder.co.uk]
Gesendet: Dienstag, 27. April 2004 19:19
An: eci-en(a)lists.transmedia.de
Betreff: [ECI-EN] (no subject)
I am currently trying to initiate a project to ensure all of our KBA
sheetfed presses are printing to ISO standard. Is it
possible to tell me
where I can get information on this.
I have downloaded an ICC profile for matt coated stock and installed it
on an Agfa Grand Sherpa with promising results.
However what specification must I ensure is adhered to on the presses to
print to this profile.
I.E What is the allowed dot gain on press for CMYK. If it is not correct
do you suggest to correct this on the rip to meet the ISO standards.
As far as I understand what the ISO standard will ensure is that
everything is standard, such as dot gain and such like. That will tell a
designer how different his work will print
Is it then feasable that if scans are supplied linear that the correction
is done on the rip bearing in mind that they have already been viewed
using an icc profile that is geared for my presses.
As you can see I am very keen to adopt the ISO standard but need to be
very clear how I achieve this
Kind Regards
Mark
Attachments:
- attachment.htm (text/html — 3.7 KB)