Re: [ECI-EN] Uncoated paper and dot gain curves.

Jon A Sandholt wrote This is reasonably simple. As long as you know what densities, TVI (dot gain) etc the uncoated profile requires, and you know what your presses TVI is normally, when using these papers, then a simple adjustment curve, (if the press does not match the profiles required TVI), on plate output can insure the correct dot gain on press. Often a test on press is needed, using a set of linear plates, with 2% to 100% patches in all colours, to measure the TVI. Regards Paul Sherfield The Missing Horse Consultancy Ltd Telephone: 01442 871752 Mobile: 07899 906385 Apple Solutions Expert-Print & Publishing This email and any attachments may be confidential and are intended solely for the use of addressee. If you are not the intended recipient of this message, any disclosure, copying or other distribution is strictly prohibited and may be unlawful. If you have received this message in error, please notify the sender and delete all copies from your system. Email may be susceptible to data corruption, interception and unauthorised amendment. We do not accept liability for any such corruption, interception or amendment or the consequences thereof. We do not accept liability for any action or inaction by the recipient as a result of advice or information contained within this email.