4:24 p.m.
Hi Folks,
I've done some tests earlier about gloss laminating. Based on these, the
reason for color shift is twofold:
1. The adhesive and the foil provide an effect optically as a "wet stone",
that is, as a planparalel plate. (For thermal foils, the glue is almost
exclusively causes the color shift effect, using matte foil the "culprit"
is the foil.) The colors become more saturated and darker.
2. Saturated and darker colors also cause optical Dot gain. And it is very
important, for lower TV we always get bigger TVI, because the paper color
will be changed also. This is the reason we never get the same effect on
proofs. The proof use different screening. This a very important isue.
Both problems can be eliminated by decreasing density, on the one hand
reducing TVI. Matt foil typically lightens the black, and can compensated
for it by increasing density. The question is always whether we want to
compensate these effects or not? The answer is always we do not want to
change the color shift.
Regards,
Pal Bekesy
Hungary
2018-02-27 11:37 GMT+01:00 <eci-en-request(a)lists.callassoftware.com>om>:
Send ECI-EN mailing list submissions to
eci-en(a)lists.callassoftware.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.callassoftware.com/mailman/listinfo/eci-en
or, via email, send a message with subject or body 'help' to
eci-en-request(a)lists.callassoftware.com
You can reach the person managing the list at
eci-en-owner(a)lists.callassoftware.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of ECI-EN digest..."
Today's Topics:
1. Re: Question about velvet lamination (LYAUDET, Herve)
----------------------------------------------------------------------
Message: 1
Date: Tue, 27 Feb 2018 19:20:55 +0900
From: "LYAUDET, Herve" <h.lyaudet(a)altavia-paris.com>
Subject: Re: [ECI-EN] Question about velvet lamination
To: eci-en(a)lists.callassoftware.com
Message-ID:
<CA+1uu_aEtsL1QHcuv+nroVD8sqnWLj0ekFGUKZbam-AOMS3_
og(a)mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
*Hello everyone,*
I appreciate your time and attention, your answers are very important for
me.
Velvet seems to be a less matte stratification that F49. But the result
seems to be very low reflectance and does make the colour lighter and a
touch yellower.
*'The alternative can be to laminate the proof with the same film, if you
have access to such equipment.*
*Important: then you need also a profile (or "gamut" in GMG-speak) of the
laminated proof (print an ECI2002 or IT8.7/4 with a linear transformation
on your proofer, laminate and measure). *
*Do not assume that you can simply make a F39 proof and laminate it to get
the same optical effect and color shift as on the print - much of the color
shift is additional optical dot gain which depends on the screen.'*
Thanks for the tip :) If I'm lucky, maybe I could do a press test and
laminate.
*Gentlemen, thank you very much.*
*Best regards.*
Herv?
2018-02-27 4:23 GMT+09:00 Nick Burton <nick.burton(a)magharl.co.uk>uk>:
?
Hi all
I am wondering if ?velvet? refers to what is normally stated as a soft
touch varnish this normally should be having very low reflectance and
does
make the colour lighter and a touch yellower.
For spot colours we normally give printers pre and post values to help
mix
the ink where as with process we ask to see
sheets unvarnished and check
to
12647 as I don?t believe a standard has been
created for this kind of
work
yet.
Would be interesting to hear any other opinions or whether this is
something of an ISO consideration.
Kind regards
Nick
On Mon, 26 Feb 2018 at 17:43, Kleeberg, Dieter (bvdm) <dk(a)bvdm-online.de
wrote:
> Salut Herv?,
>
>
>
> additionally to Hanno?s answer: A prerequisite of use of the profile
> ?PSO_Coated_v2_300_Matte_laminate_eci.icc? (seems to be the right
choice
> for velvet) is a tone value increase 10%
higher compared to Fogra39.
That
> means, in the 40% tone you should set an
increase value of 13% + 10% =
23%
> for CMY and of 16% + 10% = 26% for K. I don?t
know the effects of
?velvet?
> but I think you should not go beyond 10%+
because that increase is a
> compensation of the light refraction in the film layer depending on its
> typical thickness. This is only a rough rule of thumb, and for glossy
> laminate you can work with the same curves.
>
>
>
> Best regards,
>
> Dieter
>
>
>
>
>
> *Von:* eci-en-bounces(a)lists.callassoftware.com [mailto:
> eci-en-bounces(a)lists.callassoftware.com] *Im Auftrag von *Hanno
Hoffstadt
> *Gesendet:* Montag, 26. Februar 2018 09:40
> *An:* eci-en(a)lists.callassoftware.com
> *Betreff:* Re: [ECI-EN] Question about velvet lamination
>
>
>
> Hi Herv?,
>
>
>
> I am not familiar with "velvet films" as a term. Are they very silky,
> matte (fuzzy) and at the same time with a wide "glossy sheen" which
> captures much of the ambient light, but directional? So that intensity
> changes with orientation?
>
> This is what I assume for the following...
>
>
>
> It is a difficult case for proofing. The characterization data are for
> 45/0 geometry, but the viewing is more like diffuse illumination with an
> overall direction, which in this case can make a big difference.
>
> It may help to get the viewing closer to a 45/0 or 0/45 situation by
> blocking much of the other diffuse ambient light. Then a print-to-proof
> match which measures close to 0 Delta E will also appear close.
>
>
>
> F49 is probably a bit too light in the shadows, you may see more
contrast
> on the laminated print. But it should get the
color shift approximately
> right if your screen is around 150-180 lpi.
>
> (F49 and F50 are not well suited for extremely fine or coarse or NP/FM
> screens, where the color shifts will be smaller.)
>
> But this is only the colorimetric part of the story... without the
> surface properties.
>
>
>
> There is no proofing substrate which matches the surface of matte and
> silky lamination well.
>
> The alternative can be to laminate the proof with the same film, if you
> have access to such equipment.
>
> Important: then you need also a profile (or "gamut" in GMG-speak) of the
> laminated proof (print an ECI2002 or IT8.7/4 with a linear
transformation
> on your proofer, laminate and measure).
>
> Do not assume that you can simply make a F39 proof and laminate it to
get
> the same optical effect and color shift as on
the print - much of the
color
> shift is additional optical dot gain which
depends on the screen.
>
>
>
> Best regards
>
> Hanno
>
>
>
> --
>
> Dr. Hanno Hoffstadt
> Senior Color Scientist
> ------------------------------------------------------------
------------
> Markbronner Weg 6
> D-89077 Ulm
> Germany
>
> phone: +49 731 1406 4651 <+49%20731%2014064651>
>
> skype: hannohoffstadt
>
>
> GMG GmbH & Co. KG
> Moempelgarder Weg 10
> 72072 Tuebingen
> Germany
> Phone: +49 7071 93874-0
> Fax: +49 7071 93874-22 <+49%207071%209387422>
> mail to: hanno.hoffstadt(a)gmgcolor.com
> www.gmgcolor.com
> ------------------------------------------------------------
------------
>
> GMG is a leading developer and supplier of high-end color management
> software solutions. Our customers span a wide range of industries and
> application areas including advertising agencies, prepress houses,
offset,
> flexo, packaging, digital, and large-format
printers as well as gravure
> printers.
>
>
>
> GMG GmbH & Co. KG. Registered Office: Tuebingen. Court of Registration:
> Stuttgart Local Court, No. HRA 381463.
> General Partner: GMG Verwaltung GmbH. Registered Office: Tuebingen.
Court
> of Registration: Stuttgart Local Court, No.
HRB 382505.
> Managing Directors: Ian Scott, Joerg Weihing, Robert Weihing
>
>
>
> CONFIDENTIALITY
>
> The information in this e-mail and in any attachments is confidential
and
> may be privileged or otherwise protected from
disclosure. It is intended
> solely for the attention and use of the named addressee(s). If you are
not
> the intended recipient, please telephone or
e-mail the sender and delete
> this message and any attachment from your system.
>
>
>
>
>
>
>
> Am 26.02.2018 um 03:09 schrieb LYAUDET, Herve <
> h.lyaudet(a)altavia-paris.com>gt;:
>
>
>
> *Hello everyone,*
>
>
>
> I request an expert opinion about velvet lamination. Maybe one of the
ECI
> members can help me ?
>
> Can i use the F49 matte laminate characterization for a velvet
lamination?
..Velvet lamination is very specific..
*Best regards.*
Herv?
--
*Herve LYAUDET*
Responsable colorim?trie et flux de production
*ALTAVIA PARIS*
Phone: +33 1 49 48 82 32 <+33%201%2049%2048%2082%2032>
Cell: +33 6 27 78 47 53 <+33%206%2027%2078%2047%2053>
www.altavia-group.com
www.altaviawatch.com
_______________________________________________
ECI-EN mailing list
ECI-EN(a)lists.callassoftware.com
http://lists.callassoftware.com/mailman/listinfo/eci-en
--
Nick Burton Print Quality Manager DDI 01895 432 460 ? Main 01895 432 400 nick.burton(a)magharl.co.uk
<http://www.magharl.co.uk>
A Magnet Harlequin Group Company.
*Please consider the environment before printing this email*
<http://www.magharl.co.uk/> <https://twitter.com/magnetharlequin>
<https://www.linkedin.com/company/magnet-harlequin>
<https://www.facebook.com/magnetharlequin/>
Magnet Harlequin Limited is a Limited Liability Company registered at
Companies House, Cardiff. Registration No 1708356.
Registered Address: Unit F, Tomo Estate, Packet Boat Lane, Cowley,
Uxbridge, Middlesex, UB8 2JP.
DISCLAIMER: This email and any attachments sent with it may contain
confidential and legally privileged information. It is intended solely
for
the individual or entity to whom the email was
addressed. If you are not
the intended recipient please notify the sender via email immediately,
delete the email (and attachments) from your computer system and destroy
any copies you may have in your possession. You are prohibited from
using,
printing, copying or disclosing any of the
information contained within
the
email and its attachment(s). Magnet Harlequin
does not accept any
responsibility or liability for any changes made to this email after it
was
sent or for any viruses transmitted through it.
Opinions, comments, and
conclusions made in this email may be that of the author and may not
reflect the view of Magnet Harlequin.
_______________________________________________
ECI-EN mailing list
ECI-EN(a)lists.callassoftware.com
http://lists.callassoftware.com/mailman/listinfo/eci-en
--
Herve LYAUDET
Responsable colorim?trie et flux de production
ALTAVIA PARIS
Phone: +33 1 49 48 82 32 <+33%201%2049%2048%2082%2032>
Cell: +33 6 27 78 47 53 <+33%206%2027%2078%2047%2053>
www.altavia-group.com
www.altaviawatch.com
[image: www.altavia-group.com] <http://www.altavia-group.com>
[image: Facebook Altavia] <https://www.facebook.com/altavia.group> [image:
Linkedin Altavia] <https://fr.linkedin.com/company/altavia> [image:
Twitter
Altavia Group] <https://twitter.com/altaviagroup> [image: Twitter Altavia
Watch] <https://twitter.com/AltaviaWatch>
--
The information in this email and any attachments are the property of
ALTAVIA or its affiliates and may contain proprietary and confidential
information that is intended for the addressee(s) only. If you are not the
intended recipient, please refrain from any disclosure, copying,
distribution, retention or use of this information. You are hereby
notified that
such actions are prohibited and could be illegal. If you have received this
e-mail in error, please immediately contact the sender and delete the
e-mail. We appreciate your cooperation. Email transmissions being not
guaranteed, ALTAVIA and its affiliates decline their liability due to this
email transmission, specifically when altered, modified or falsified.Les
informations contenues dans cet e-mail ainsi que les fichiers joints sont
la propri?t? d?ALTAVIA et / ou ses filiales et peuvent ?tre des
informations confidentielles et priv?es qui sont adress?es ? l?attention de
leur destinataire uniquement. Si vous n??tes pas le destinataire du message
merci de ne pas divulguer, copier, diffuser, conserver ou utiliser ces
informations. Vous ?tes par la pr?sente notifi? que ces agissements sont
interdits et peuvent ?tre ill?gaux. Si vous avez re?u cet e-mail par
erreur, merci de prendre contact imm?diatement avec l?exp?diteur et de
d?truire cet e-mail. Nous vous remercions de votre coop?ration. La
correspondance en ligne n??tant pas un moyen enti?rement s?curis?, ALTAVIA
et ses filiales d?clinent toute responsabilit? au titre de cette
transmission, notamment si son contenu a ?t? alt?r?, d?form? ou falsifi?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.callassoftware.com/pipermail/eci-en/
attachments/20180227/bdcdec79/attachment.html
------------------------------
_______________________________________________
ECI-EN mailing list
ECI-EN(a)lists.callassoftware.com
http://lists.callassoftware.com/mailman/listinfo/eci-en
End of ECI-EN Digest, Vol 82, Issue 7
*************************************