Hi
I have use the Fogra 39 surface finishing profiles with success for
magazine covers, so would welcome similar profiles based on Fogra 51.
Regards
Paul Sherfield
The Missing Horse Consultancy Ltd
07899 906385
http://www.missinghorsecons.co.uk
Follow us on:
Twitter.com/missinghorse
Apple Solutions Expert-Print & Publishing
Member - UK TC130 Technical Advisory Group (ISO 12647 Printing Standards)
Chair - BPIF ISO 12647 certification steering group
Member – UK TAG TC130 for ISO printing standards
UK Representative-ISO TC130- WG13 for printing standards certification
Lean and green?
To save money and become a greener printer, see
http://www.greenprinter.co.uk
http://www.keeconsultants.com
Reduce your carbon footprint
http://www.1010uk.org
This email and any attachments may be confidential and are intended solely
for the use of addressee. If you are not the intended recipient of this
message, any disclosure, copying or other distribution is strictly
prohibited and may be unlawful.
If you have received this message in error, please notify the sender and
delete all copies from your system. Email may be susceptible to data
corruption, interception and unauthorised amendment.
We do not accept liability for any such corruption, interception or
amendment or the consequences thereof. We do not accept liability for any
action or inaction by the recipient as a result of advice or information
contained within this email.
-----Original Message-----
From: <eci-en-bounces(a)lists.callassoftware.com> on behalf of
"eci-en-request(a)lists.callassoftware.com"
<eci-en-request(a)lists.callassoftware.com>
Reply-To: <eci-en(a)lists.callassoftware.com>
Date: Monday, 6 February 2017 at 10:48
To: <eci-en(a)lists.callassoftware.com>
Subject: ECI-EN Digest, Vol 78, Issue 1
>Send ECI-EN mailing list submissions to
> eci-en(a)lists.callassoftware.com
>
>To subscribe or unsubscribe via the World Wide Web, visit
>
http://lists.callassoftware.com/mailman/listinfo/eci-en
>or, via email, send a message with subject or body 'help' to
> eci-en-request(a)lists.callassoftware.com
>
>You can reach the person managing the list at
> eci-en-owner(a)lists.callassoftware.com
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of ECI-EN digest..."
>
>
>Today's Topics:
>
> 1. eci offset profiles surface finished. (Axel Robert)
> 2. Re: eci offset profiles surface finished. (Hanno Hoffstadt)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Mon, 6 Feb 2017 08:12:26 +0000
>From: Axel Robert <axel.robert(a)ubisoft.com>
>Subject: [ECI-EN] eci offset profiles surface finished.
>To: "eci-en(a)lists.callassoftware.com"
> <eci-en(a)lists.callassoftware.com>
>Message-ID: <53041EC0-6198-4D73-93F8-75C0A6125A70(a)ubisoft.com>
>Content-Type: text/plain; charset="utf-8"
>
>Dear all,
>
>I would like to obtain more information about the following ICC profiles:
>PSO_Coated_v2_300_Glossy_laminate_eci.icc
>PSO_Coated_v2_300_Matte_laminate_eci.icc
>
>I partially switched from F39 to F51 and F47 to F52.
>But I still use the former (aka F49 and F50).
>
>Should I take into account they also will change since the new printing
>conditions?
>Are they still relevant?
>Or should they be adapted?
>And if so, when or how?
>
>Thank you for your answer.
>
>Regards.
>Axel
>
>
>Axel Robert | Prepress Manager
>Ubisoft EMEA |Manufacturing
>28, rue Armand Carrel | 93100 Montreuil | France
>Tel: +33(0)1 48 18 52 03 | Skype: axelprepress
>
>
>