Juris I am assuming you would like the Aqueous Coating work to match an ISO Standard and proof. Would you consider establishing new target densities and dot gains that best reflect the ISO standard you are aiming for with the coating. This would mean a separate plate output for the Aqueous Coating, and most probably different target densities to achieve the ISO Lab targets. Michael On 3/04/12 6:53 PM, "Juris Valdmanis" <bebris(a)jt.lv> wrote: Hello everyone, We have Speedmaster 102-4-PL press with AxisContorl. There are targets defined in AxisControl to hit ISO standard and it is OK with most of jobs. Problems are with jobs that has to be varnished with Aqueous Coating. Coating that we use (HI-COAT W2960 Matlak double sided) makes all colors less saturated. If color bar is also varnished, AxisControl will try to compensate Aqueous Coating "effect" by adding more ink to the sheets. More ink will make high dot gain. Question is: should we try to hit ISO Lab targets also with Aqueous Coating? Or maybe we should NOT apply coating to color bar? regards, Juris __________________________________________________________________________________________________________________________________________________________ This email and any attached files are confidential. They are intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the sender by return email, and delete the original. All outgoing emails and attached files are virus scanned, but we do not represent that this email and any attached files are free from computer viruses or other defects. Further, we do not accept any liability for any damage caused by this email or attachments. __________________________________________________________________________________________________________________________________________________________