Concerning: TAC of ISOuncoated profile Following the question of Morgan I have a question as well on this subject: - Is the present TAC value in the ISOuncoated profile (320%) acceptable for sheetfed offset printers? As Morgan states that it is too high for his press room I am wondering what are the experiences of other sheetfed offset printers? - By the way: We are using a modified version (TAC 240%) of this profile for web offset. Best regards, Jo Brunenberg ROTO SMEETS eci-en(a)lists.callassoftware.com,Internet writes: Message: 2 Date: Wed, 27 Feb 2008 11:11:40 +0100 From: Morgan Axelsson <morgan.axelsson(a)atta45.se> Subject: [ECI-EN] Uncoated paper in Sheetfed enviroment To: eci-en(a)lists.callassoftware.com Message-ID: <F5356E56-606F-4BDA-878B-0B966260F9BB(a)atta45.se> Content-Type: text/plain; charset="iso-8859-1" I dont know were to go At our printphop we have Heidelberg sheetfed presses Two 8c 70x100 One 8c 50x70 one 5c 70x100 We are thinking of changing our colour management workflow into ISO standard the ISOcoated_v2_300_eci Will probebly work fine but the ISOuncoated We have a problem with that profile, it?s set to total ink coverage of 320% even more than the coated one These days we have around 260% of total ink coverage on uncoated paper in sheetfeed environment This is a problem we have if we should make it easy for our client to start using ISO standard Do any have any solution or idea for future ISO profiles for sheetfed presses Regards Morgan Axelsson _______________________________________________ ECI-EN mailing list ECI-EN(a)lists.callassoftware.com http://lists.callassoftware.com/mailman/listinfo/eci-en