Hello Lars
We at Sappi (producer of Galerie Fine, former M-real) categorise all
our grades according to standard profiles (and char data) in the
market and Galerie Fine has been categorised into Fogra 39 / ISOcoated
v2 300.
As mentioned by some Fogra 45 / PSO Improved is also a pretty close
match but with Galerie Fine we have preferred to recommend Fogra 39 as
the brigthness and shade as well very good smoothness are comparable
with standard woodfree coated grades.
Hopefully this helps and please do not hesitate if you have any
further questions concerning colour management with Sappi paper grades
Best regards Jouni Marttila (jouni.marttila(a)sappi.com, Printint
Research Manager at Sappi Fine Paper Europe)
2009/11/20, fpenalver(a)litografiaroses.com <fpenalver(a)litografiaroses.com>om>:
Hi Lars
My answer to question #1: Yes.
We produce several magazines with heatset web presses and according to ISO
12647-2, and we're using the well-known icc profile from the ECI: ISO Coated
v2 300% (Fogra39) on Galerie Fine paper.
I would like to add that I was said that M-real has categorised its Galerie
Range according to paper groups in ISO 12647-2, and they also have created
Galerie Fine specific ICC profile from the FOGRA39 data, optimised for
heatset printing according to ISO 12647-2. We have never tested that
profile, but I presume that working with that specific profile, you should
get best quality.
Kind regards,
Ferran Peñalver
Prepress Area | LITOGRAFIA ROSÉS, S.A.
________________________________________
De: eci-en-bounces(a)lists.callassoftware.com
[mailto:eci-en-bounces@lists.callassoftware.com] En nombre de Lars Jacobsen
Enviado el: viernes, 20 de noviembre de 2009 14:36
Para: eci-en(a)lists.callassoftware.com
Asunto: [ECI-EN] Heatset and Fogra39?
Hi listmembers,
I represent a sheetfed printing company. One of our customers is a heatset
web printing company and we print covers for their magazines.
We print very close to Fogra39, our proofs are mostly spot on and we
document and adjust our production with Bodoni pressSIGN software.
Our customer is happy, but often they have spread adds going from Cover page
2 and over on the heatset web body page 3. The body is produced on a Goss
press on Galeri Fine Gloss and (they think at least) according to Fogra28.
As far as I know this paper is not like Fogra28 and Fogra28 is
replaced...anyway...I see three ways to get a close match between our
Fogra39 page and their heatset page if we say they can manage colors:
1. Is it possible to produce acording to Fogra39 on Galerie Fine Gloss on a
Goss press (ISO coated v2_300)?
This would be the easy way and give the best quality.
2. Color conversion from Customer press ICC profile to Fogra39 with Device
Link profiles. We still produce according to Fogra39.
Colors on cover page 2 and 3 are shrinked to heatset web on file level.
3. We simulate Customer press ICC by lowering gamut and gaining dotgain with
TVI curves.
Hard way, lot of work for prepress, press and requires two proofs. Not a
good solution.
I´m hoping for answers that says that is possible to produce according to
Fogra39 in heatset web.
Thanks,
Lars.
___________________________________
www.litografiaroses.com
_______________________________________________
ECI-EN mailing list
ECI-EN(a)lists.callassoftware.com
http://lists.callassoftware.com/mailman/listinfo/eci-en