[ECI-EN] TAC of ISOuncoated profile

Like many people say we could do converting in the workflow. But I really don't like to do any changes. I would like my client to use ISO profiles that are set to 260% uncoated and 300% for coated. (Maybe less because of all the perfector machines out there 290% coated) If I was a designer I don't like the printer shop to modify any of my files. So instead of change customer files I rather learn them how to use the right profiles. We set up rule how our files should be produce and the customer work after these rules. We cant get it right from all customer but that is the main goal. To make is easy for customer to use profiles from ECI Would be that In the profile name it should say web or sheetfed Designer like lot´s of ink and in web press you could have higher TAC than sheetfeed macines I think ECI need to make new standard profiles like WEBPRESS STANDARD ISOwebcoatedxxx%.icc ISOwebuncoatedxxx%.icc SHEETFEED STANDARD ISOSheetfeedcoatedxxx%.icc ISOSheetfeeduncoatedxxx%.icc Best Regards Morgan Axelsson -----Ursprungligt meddelande----- Från: eci-en-bounces(a)lists.callassoftware.com [mailto:eci-en-bounces@lists.callassoftware.com] För eci-en-request(a)lists.callassoftware.com Skickat: den 14 mars 2008 15:02 Till: eci-en(a)lists.callassoftware.com Ämne: ECI-EN Digest, Vol 25, Issue 14 Send ECI-EN mailing list submissions to eci-en(a)lists.callassoftware.com To subscribe or unsubscribe via the World Wide Web, visit http://lists.callassoftware.com/mailman/listinfo/eci-en or, via email, send a message with subject or body 'help' to eci-en-request(a)lists.callassoftware.com You can reach the person managing the list at eci-en-owner(a)lists.callassoftware.com When replying, please edit your Subject line so it is more specific than "Re: Contents of ECI-EN digest..." Today's Topics: 1. TAC of ISOuncoated profile (Jo Brunenberg) 2. Re: TAC of ISOuncoated profile (Magnus Sandstr?m) 3. Re: TAC of ISOuncoated profile (Florian S??l) 4. Re: TAC of ISOuncoated profile (Henk Gianotten) 5. Re: RGB and CMYK files in a PDF/X-3:2002 file (Jo Brunenberg) ---------------------------------------------------------------------- Message: 1 Date: Fri, 14 Mar 2008 14:31:01 +0100 From: "Jo Brunenberg" <jo.brunenberg(a)rsdb.com> Subject: [ECI-EN] TAC of ISOuncoated profile To: eci-en(a)lists.callassoftware.com Message-ID: <fc.000f5799041e7a5c3b9aca008fe1aa05.2b574f6(a)rotonet.rsdb.nl> Content-Type: text/plain; charset="iso-8859-1" Concerning: TAC of ISOuncoated profile Following the question of Morgan I have a question as well on this subject: - Is the present TAC value in the ISOuncoated profile (320%) acceptable for sheetfed offset printers? As Morgan states that it is too high for his press room I am wondering what are the experiences of other sheetfed offset printers? - By the way: We are using a modified version (TAC 240%) of this profile for web offset. Best regards, Jo Brunenberg ROTO SMEETS eci-en(a)lists.callassoftware.com,Internet writes: