Re: [ECI-EN] Uncoated paper in Sheetfed enviroment
27 Feb
2008
27 Feb
'08
12:39 p.m.
Hello Morgan,
Based on FOGRA Characterization-data, You can use the GCR based profiles
from
http://www.colormanagement.org/en/isoprofile.html
The version for FOGRA29 (ISOuncoated) has a TAC of 280. GCR lowers the
amount of Ink in all areas and not only in the darkest areas,
You also get a better print stability with the GCR-profiles compared to
the black generation in the ECI profiles.
Just test it with your own RGB-data (or http://www.roman16.com )
Regards
Jan-Peter
Morgan Axelsson wrote:
I dont know were to go
At our printphop we have Heidelberg sheetfed presses
Two 8c 70x100
One 8c 50x70
one 5c 70x100
We are thinking of changing our colour management workflow into ISO
standard
the
ISOcoated_v2_300_eci Will probebly work fine
but the
ISOuncoated
We have a problem with that profile, it´s set to total ink coverage of
320% even more than the coated one
These days we have around 260% of total ink coverage on uncoated paper
in sheetfeed environment
This is a problem we have if we should make it easy for our client to
start using ISO standard
Do any have any solution or idea for future ISO profiles for sheetfed
presses
Regards
Morgan Axelsson
------------------------------------------------------------------------
_______________________________________________
ECI-EN mailing list
ECI-EN(a)lists.callassoftware.com
http://lists.callassoftware.com/mailman/listinfo/eci-en
--
*********** Neue Adresse / new adress ************
homann colormanagement ------ fon/fax +49 30 611 075 18
Jan-Peter Homann ------------- mobile +49 171 54 70 358
Christinenstr. 21 ------ http://www.colormanagement.de
10119 Berlin -------- mailto:homann@colormanagement.de
*********** Neue Adresse / new adress ************