Hi Lars
My answer to question #1: Yes.
We produce several magazines with heatset web presses and according to ISO 12647-2, and
we're using the well-known icc profile from the ECI: ISO Coated v2 300% (Fogra39) on
Galerie Fine paper.
I would like to add that I was said that M-real has categorised its Galerie Range
according to paper groups in ISO 12647-2, and they also have created Galerie Fine specific
ICC profile from the FOGRA39 data, optimised for heatset printing according to ISO
12647-2. We have never tested that profile, but I presume that working with that specific
profile, you should get best quality.
Kind regards,
Ferran Peñalver
Prepress Area | LITOGRAFIA ROSÉS, S.A.
________________________________________
De: eci-en-bounces(a)lists.callassoftware.com
[mailto:eci-en-bounces@lists.callassoftware.com] En nombre de Lars Jacobsen
Enviado el: viernes, 20 de noviembre de 2009 14:36
Para: eci-en(a)lists.callassoftware.com
Asunto: [ECI-EN] Heatset and Fogra39?
Hi listmembers,
I represent a sheetfed printing company. One of our customers is a heatset web printing
company and we print covers for their magazines.
We print very close to Fogra39, our proofs are mostly spot on and we document and adjust
our production with Bodoni pressSIGN software.
Our customer is happy, but often they have spread adds going from Cover page 2 and over on
the heatset web body page 3. The body is produced on a Goss press on Galeri Fine Gloss and
(they think at least) according to Fogra28. As far as I know this paper is not like
Fogra28 and Fogra28 is replaced...anyway...I see three ways to get a close match between
our Fogra39 page and their heatset page if we say they can manage colors:
1. Is it possible to produce acording to Fogra39 on Galerie Fine Gloss on a Goss press
(ISO coated v2_300)?
This would be the easy way and give the best quality.
2. Color conversion from Customer press ICC profile to Fogra39 with Device Link profiles.
We still produce according to Fogra39.
Colors on cover page 2 and 3 are shrinked to heatset web on file level.
3. We simulate Customer press ICC by lowering gamut and gaining dotgain with TVI curves.
Hard way, lot of work for prepress, press and requires two proofs. Not a good solution.
I´m hoping for answers that says that is possible to produce according to Fogra39 in
heatset web.
Thanks,
Lars.
___________________________________
www.litografiaroses.com