Liebe Renate,
das Hautmotiv ist super, wäre bestimmt auch sehr aufschlussreich für
den Testdruck. Der von Dir beschriebene Effekt bei GCR50 taucht aber
nur bei perzeptiver Konvertierung auf, relativ farbmetrisch ist das
nicht der Fall. Da die Unterschiede von L9B5 und GCR50 im
Schwarzaufbau nicht wirklich gravierend sind, ist die UCR-Einstellung
L9B5 wahrscheinlich wirklich der bessere Kompromiss (Screenshots anbei).
Viele Grüße,
Sascha
Jung von Matt/basis GmbH
Sascha Bugai
Glashüttenstr. 38
20357 Hamburg
Tel: +49 (0) 40/4321-1299
Fax: +49 (0) 40/4321-1163
E-Mail: sascha.bugai(a)jvm.de
Internet: http://www.jvm.de
Am 02.11.2006 um 14:17 schrieb Rewer Renate:
> Hallo liebe wg Mitstreiter,
>
> Nach einigen Tests möchte ich mich ausdrücklich gegen die
> Separationseinstellung U330 K100 G50 aussprechen.
> Diese Einstellung führt besonders im Tertiärfarbbereich Braun zu
> Abrissen. Besonders gut zu sehen in Verläufen Schatten zu Licht bei
> Hauttönen.
> Des weiteren hat das Profil von L5 zu L0 einen Kipper vom Neutralen
> ins Braune.
> Ich habe auf dem Server ein Bild und einen L- Keil hinterlegt
> (skin_and gray). Das letztere Problem kann man besonders einfach am
> L-Keil reproduzieren.
>
> Die Profileinstellung K100 9-5 bietet einen guten Kompromiss
> zwischen GCR und UCR.
>
> Ein gutes Gelingen bei den Testdruck!
>
> Renate Rewer
> --
> PS: Besuchen Sie uns online! Ab sofort stehen Ihnen aktuelle
> Neuigkeiten und viele weitere Infos über unsere Leistungen, unsere
> Referenzen und Teams unter www.laudert.de <BLOCKED::http://
> www.laudert.de/> zur Verfügung. Wir freuen uns auf Ihren Besuch!
>
> Laudert
> Vreden-Hamburg-Paris
> Renate Rewer
> Colormanagement/Workflow
>
> Von-Braun-Straße 8
> 48691 Vreden
>
> Tel. +49 (0) 25 64 - 919 - 250
> Fax: +49 (0) 25 64 - 919 - 100
> E-Mail: r.rewer(a)laudert.de
> Internet: www.laudert.de <http://www.laudert.de>
> _______________________________________________
> WG_OFFSET_PROFILES mailing list
> WG_OFFSET_PROFILES(a)lists.callassoftware.com
> http://lists.callassoftware.com/mailman/listinfo/wg_offset_profiles
>
>
Hallo liebe wg Mitstreiter,
Nach einigen Tests möchte ich mich ausdrücklich gegen die
Separationseinstellung U330 K100 G50 aussprechen.
Diese Einstellung führt besonders im Tertiärfarbbereich Braun zu Abrissen.
Besonders gut zu sehen in Verläufen Schatten zu Licht bei Hauttönen.
Des weiteren hat das Profil von L5 zu L0 einen Kipper vom Neutralen ins
Braune.
Ich habe auf dem Server ein Bild und einen L- Keil hinterlegt (skin_and
gray). Das letztere Problem kann man besonders einfach am L-Keil
reproduzieren.
Die Profileinstellung K100 9-5 bietet einen guten Kompromiss zwischen GCR
und UCR.
Ein gutes Gelingen bei den Testdruck!
Renate Rewer
--
PS: Besuchen Sie uns online! Ab sofort stehen Ihnen aktuelle Neuigkeiten und
viele weitere Infos über unsere Leistungen, unsere Referenzen und Teams
unter www.laudert.de <BLOCKED::http://www.laudert.de/> zur Verfügung. Wir
freuen uns auf Ihren Besuch!
Laudert
Vreden-Hamburg-Paris
Renate Rewer
Colormanagement/Workflow
Von-Braun-Straße 8
48691 Vreden
Tel. +49 (0) 25 64 - 919 - 250
Fax: +49 (0) 25 64 - 919 - 100
E-Mail: r.rewer(a)laudert.de
Internet: www.laudert.de <http://www.laudert.de>
Hi Mr Süssl
I will inform my printers about the delay, i think they will be not unhappy, cause they are really complete at the moment ;-)))
Michael Hilmer
*Von:* wg_offset_profiles(a)lists.callassoftware.com
*Gesendet:* 01.11.06 12:21:54
*An:* wg_offset_profiles(a)lists.callassoftware.com
*Betreff:* Re: [WG Offset-Profiles] new ISOcoated v2 | testing perceptual conversion please
Hi Elie,
the plan was to wrap it up this week - as most of our collegues seem
to be very busy too, we should extend the testing phase until the end
of next week.
Sascha, Mr. Hilmer,
would you please inform your printers about the delay with the
availability of our test forme - thanks a lot.
have a successful event!
Florian
Am 01.11.2006 um 12:11 schrieb ELIE KHOURY:
> Hi Florian, all,
> We have an event here this week which is keeping us very busy.
> Is there a deadline for the feedback? next week would be OK or too
> late?
>
> Kind Regards,
> Elie
>
> ..........................................
> Elie KHOURY
> Managing Director
> ALWAN COLOR EXPERTISE
> The Graphic Industry Standardization Company
> 31 chemin du plan du loup
> 69110 Sainte Foy lès Lyon
> T : 33 4 72 16 08 82
> F : 33 4 72 16 95 87
> e-mail : eliekhoury(a)alwancolor.com
> www.alwancolor.com
>
>
> On 1 nov. 2006, at 11:35, Florian Süßl wrote:
>
>> Dear collegues,
>>
>> Can you please check the perceptual conversion quality of the new
>> profile 'ISOcoated_v2_ECI U330 K100 G50 I v3 -2.icc'
>>
>> On the ftp-server you can find a pdf from Sascha Bugai
>> 'dark_skintone_PO_GCR50.pdf' with an excellent comparison of the new
>> perceptual conversion with the result of the 'old' profile
>> 'ISOcoated_v2_ECI U330 K100 G50.icc'
>>
>> Please check especially possible side effects in e.g. dark colors
>> becoming too saturated.
>>
>> all the best,
>> Florian Suessl
>> --
>> Florian Suessl, Director Technology
>>
>> MetaDesign AG, Leibnizstrasse 65, 10629 Berlin
>> +49 30 59 00 54 246, fax +49 30 59 00 54 114
>> fsuessl(a)metadesign.de, http://www.metadesign.de,
>> http://www.metaprintcheck.de
>>
>>
>> _______________________________________________
>> WG_OFFSET_PROFILES mailing list
>> WG_OFFSET_PROFILES(a)lists.callassoftware.com
>> http://lists.callassoftware.com/mailman/listinfo/wg_offset_profiles
>> ---------------------------------------------------------------------
>> ------------------
>> Orange vous informe que cet e-mail a ete controle par l'anti-
>> virus mail.
>> Aucun virus connu a ce jour par nos services n'a ete detecte.
>>
>>
>>
>
> _______________________________________________
> WG_OFFSET_PROFILES mailing list
> WG_OFFSET_PROFILES(a)lists.callassoftware.com
> http://lists.callassoftware.com/mailman/listinfo/wg_offset_profiles
--
Florian Suessl, Director Technology
MetaDesign AG, Leibnizstrasse 65, 10629 Berlin
+49 30 59 00 54 246, fax +49 30 59 00 54 114
fsuessl(a)metadesign.de, http://www.metadesign.de,
http://www.metaprintcheck.de
_______________________________________________
WG_OFFSET_PROFILES mailing list
WG_OFFSET_PROFILES(a)lists.callassoftware.com
http://lists.callassoftware.com/mailman/listinfo/wg_offset_profiles
--
Medienberatung
Techn. Leiter High Quality eV München
m.hilmer(a)highquality-ev.de
Handy 0179 79 63514
Fax 012126 20502000
http://www.highquality-ev.de/
Dear collegues,
Can you please check the perceptual conversion quality of the new
profile 'ISOcoated_v2_ECI U330 K100 G50 I v3 -2.icc'
On the ftp-server you can find a pdf from Sascha Bugai
'dark_skintone_PO_GCR50.pdf' with an excellent comparison of the new
perceptual conversion with the result of the 'old' profile
'ISOcoated_v2_ECI U330 K100 G50.icc'
Please check especially possible side effects in e.g. dark colors
becoming too saturated.
all the best,
Florian Suessl
--
Florian Suessl, Director Technology
MetaDesign AG, Leibnizstrasse 65, 10629 Berlin
+49 30 59 00 54 246, fax +49 30 59 00 54 114
fsuessl(a)metadesign.de, http://www.metadesign.de,
http://www.metaprintcheck.de
Hallo Sascha,
ich bin gerade auf Auslandstour und habe keinen PC dabei.
Am Freitag werde ich ein neues Profil mit »global -3« erstellen und
hochladen.
Hast Du den Vergleich mal mit anderen Motiven gemacht?
Nach meinen Tests (nur am Monitor) sorgt die Abdunklung zu
unbeabsichtigt gesättigteren dunklen Farben.
Gruß aus Österreich,
Florian
Am 01.11.2006 um 11:09 schrieb Sascha Bugai:
> Hallo Florian,
>
> ich habe einen kleinen Test gemacht und die verschiedenen Varianten
> auf Basis GCR50 zusammengestellt. Anbei das PDF, meiner Meinung
> nach könnte man den globalen Wert auf -3 reduzieren, der perzeptive
> RI fällt immer noch heller aus.
>
> Liebe Grüße,
> Sascha
>
> Jung von Matt/basis GmbH
> Sascha Bugai
> Glashüttenstr. 38
> 20357 Hamburg
>
> Tel: +49 (0) 40/4321-1299
> Fax: +49 (0) 40/4321-1163
> E-Mail: sascha.bugai(a)jvm.de
> Internet: http://www.jvm.de
>
> <Profiltest_PO_GCR50.pdf>
>
>
> Am 31.10.2006 um 18:46 schrieb Florian Süßl:
>
>> Dear collegues,
>>
>> Please find a second version of the ISO Coated v2 *GCR 50* profile in
>> our workspace on the ftp server. (ISOcoated_v2_ECI_PO5_02.zip).
>>
>> This profile is intended to check the options to successfully 'avoid
>> mid tone lightening of perceptual conversion' as it is caused by our
>> current profile ISOcoated.icc.
>>
>> The new profile has been created using a new option of PrintOpen 5.2:
>> The gamut mapping settings provide a new option 'global darker/
>> lighter' with values from -5 (darker) to +5 (lighter).
>> The respective value used in the new profile is '-2'
>>
>> Important note:
>> The profile was created using a special software version and *not*
>> the shipping version.
>> Tests with the shipping version of PrintOpen 5.2 showed too heavy
>> impact on the midtone gradation in the case characterization data
>> with large gamut (as in FOGRA39). Even the smallest value -1 resultet
>> in a CMYK image with *darker* midtones than in the result of a
>> profile conversion 'relative colorimetric with black point
>> compensation'.
>>
>>
>> Very curious to get your feedback!
>>
>> Florian
>> --
>> Florian Suessl, Director Technology
>>
>> MetaDesign AG, Leibnizstrasse 65, 10629 Berlin
>> +49 30 59 00 54 246, fax +49 30 59 00 54 114
>> fsuessl(a)metadesign.de, http://www.metadesign.de,
>> http://www.metaprintcheck.de
>>
>>
>> _______________________________________________
>> WG_OFFSET_PROFILES mailing list
>> WG_OFFSET_PROFILES(a)lists.callassoftware.com
>> http://lists.callassoftware.com/mailman/listinfo/wg_offset_profiles
>
--
Florian Suessl, Director Technology
MetaDesign AG, Leibnizstrasse 65, 10629 Berlin
+49 30 59 00 54 246, fax +49 30 59 00 54 114
fsuessl(a)metadesign.de, http://www.metadesign.de,
http://www.metaprintcheck.de