2:07 p.m.
Hello world,
Whats the correct syntax for scaling width and height individually using
pdfCorrect CLI?
--
Best regards
Rasmus Olsen
P: [+45] 8935 1504
.....................................
Digital XPress as
Filmbyen 2
DK-8100 Aarhus C
Denmark
P: [+45] 8935 1500
F: [+45] 8935 1501
www.dxp.dk
2:16 p.m.
On 16/11/07 14:07, "Rasmus Olsen" <ro(a)dxp.dk> wrote:
Whats the correct syntax for scaling width and height
individually using
pdfCorrect CLI?
Ok, not syntax but commandline call :-) Anyone?
--
Best regards
Rasmus Olsen
P: [+45] 8935 1504
.....................................
Digital XPress as
Filmbyen 2
DK-8100 Aarhus C
Denmark
P: [+45] 8935 1500
F: [+45] 8935 1501
www.dxp.dk
4:21 p.m.
Hi Rasmus,
ScalePagesEx 100 200 mm
would scale the page to 100 mm width and 200 mm height.
Dietrich
On 16/11/07 14:07, "Rasmus Olsen"
<ro(a)dxp.dk> wrote:
--
Dietrich von Seggern | Director Product Management
callas software GmbH | Schoenhauser Allee 6/7 | 10119 Berlin | Germany
Tel +49.30.4439031-0 | Fax +49.30.4416402
Amtsgericht Charlottenburg, HRB 59615 | Geschaeftsfuehrung: Olaf
Druemmer, Ulrich Frotscher
Whats the correct syntax for scaling width and
height individually
using
pdfCorrect CLI?
Ok, not syntax but commandline call :-) Anyone?
--
Best regards
Rasmus Olsen
P: [+45] 8935 1504
.....................................
Digital XPress as
Filmbyen 2
DK-8100 Aarhus C
Denmark
P: [+45] 8935 1500
F: [+45] 8935 1501
www.dxp.dk
_______________________________________________
callas_user_forum mailing list
callas_user_forum(a)lists.callassoftware.com
http://lists.callassoftware.com/mailman/listinfo/callas_user_forum
5:49 p.m.
Hi Dietrich,
Thank you for a quick response. Maybe you can help me with this:
Im working on a web frontend allowing the CSR to set the relevant scale
percentage (width and height individually) in pdfCorrect CLI cfg (used in a
Switch workflow). The press ready PDF files for a specific adpaper job have
to be delivered for press in different percentage types every week. For an
outstanding person it can be a bit tricky changing these values in the cfg
file so Im working on this web interface aiding the CSR in setting these
percentage types. I plan overwriting the original cfg file with a new file
with updated values. I need to know the specs of the cfg file - what type of
encoding should I use? I have been searcing in the pdfCorrect CLI parameters
manual for info about this but haven't found much.
BTW. please give mr. Kleinheider my regards if you see him.
Yours sincerly,
Rasmus Olsen
On 16/11/07 16:21, "Dietrich von Seggern" <d.seggern(a)callassoftware.com>
wrote:
Hi Rasmus,
ScalePagesEx 100 200 mm
would scale the page to 100 mm width and 200 mm height.
Dietrich
> On 16/11/07 14:07, "Rasmus Olsen" <ro(a)dxp.dk> wrote:
>> Whats the correct syntax for scaling width and height individually
>> using
>> pdfCorrect CLI?
>
> Ok, not syntax but commandline call :-) Anyone?
6:05 p.m.
Hi Rasmus,
the cfg files for pdfCorrect are UTF-8 encoded. Does this answer your
question?
Regards,
Dietrich
Hi Dietrich,
Thank you for a quick response. Maybe you can help me with this:
Im working on a web frontend allowing the CSR to set the relevant
scale
percentage (width and height individually) in pdfCorrect CLI cfg
(used in a
Switch workflow). The press ready PDF files for a specific adpaper
job have
to be delivered for press in different percentage types every week.
For an
outstanding person it can be a bit tricky changing these values in
the cfg
file so Im working on this web interface aiding the CSR in setting
these
percentage types. I plan overwriting the original cfg file with a
new file
with updated values. I need to know the specs of the cfg file -
what type of
encoding should I use? I have been searcing in the pdfCorrect CLI
parameters
manual for info about this but haven't found much.
BTW. please give mr. Kleinheider my regards if you see him.
Yours sincerly,
Rasmus Olsen
On 16/11/07 16:21, "Dietrich von Seggern"
<d.seggern(a)callassoftware.com>
wrote:
--
Dietrich von Seggern | Director Product Management
callas software GmbH | Schoenhauser Allee 6/7 | 10119 Berlin | Germany
Tel +49.30.4439031-0 | Fax +49.30.4416402
Amtsgericht Charlottenburg, HRB 59615 | Geschaeftsfuehrung: Olaf
Druemmer, Ulrich Frotscher
Hi Rasmus,
ScalePagesEx 100 200 mm
would scale the page to 100 mm width and 200 mm height.
Dietrich
> On 16/11/07 14:07, "Rasmus Olsen" <ro(a)dxp.dk> wrote:
>> Whats the correct syntax for scaling width and height individually
>> using
>> pdfCorrect CLI?
>
> Ok, not syntax but commandline call :-) Anyone?
_______________________________________________
callas_user_forum mailing list
callas_user_forum(a)lists.callassoftware.com
http://lists.callassoftware.com/mailman/listinfo/callas_user_forum
2:29 p.m.
Grüß Gott Dietrich,
If I create a cfg file with the line ScalePagesEx 98 97 and points
pdfCorrect CLI to this in Switch, I get an processing error when drag and
dropping a PDF file. Do I need some more lines for this to work? The "stock"
Scale Pages profile make use of an Identifier and an _IconID_.
Can you show me a functional ScalePagesEx cfg using 98% width and 97%
height?
Rasmus
On 16/11/07 18:05, "Dietrich von Seggern" <d.seggern(a)callassoftware.com>
wrote:
Hi Rasmus,
the cfg files for pdfCorrect are UTF-8 encoded. Does this answer your
question?
Regards,
Dietrich
> Hi Dietrich,
>
> Thank you for a quick response. Maybe you can help me with this:
> Im working on a web frontend allowing the CSR to set the relevant
> scale
> percentage (width and height individually) in pdfCorrect CLI cfg
> (used in a
> Switch workflow). The press ready PDF files for a specific adpaper
> job have
> to be delivered for press in different percentage types every week.
> For an
> outstanding person it can be a bit tricky changing these values in
> the cfg
> file so Im working on this web interface aiding the CSR in setting
> these
> percentage types. I plan overwriting the original cfg file with a
> new file
> with updated values. I need to know the specs of the cfg file -
> what type of
> encoding should I use? I have been searcing in the pdfCorrect CLI
> parameters
> manual for info about this but haven't found much.
>
> BTW. please give mr. Kleinheider my regards if you see him.
>
> Yours sincerly,
> Rasmus Olsen
6013
days inactive
6014
days old
callas_user_forum@lists.callassoftware.com
5 comments
2 participants
participants (2)
-
Dietrich von Seggern -
Rasmus Olsen