Hello Jani!

Thanks for your reply.

When coating is applied, AxisControl will try to get to ISO targets as close as possible by opening/closing ink keys. The doubt are that there is too much of ink under coating and printing so much ink makes process very unstable. Also dot gain becomes very high.

What does ISO says about coating? Does coated sheet should hit same targets as uncoated? Even when coating makes inks less saturated?
What is your experience what do customers require?

regards,
Juris



From:        Jani Vauhkonen - PunaMusta Oy <jani.vauhkonen@punamusta.com>
To:        eci-en@lists.callassoftware.com
Date:        2012.04.03 14:37
Subject:        [ECI-EN] Varnish desaturates
Sent by:        eci-en-bounces@lists.callassoftware.com

---

Hello Juris.

I would suggest not print varnish on colorbar.
But if somebody has investicated different target values for printing CMYK+varnish, it could be interesting to hear.
We have made some test.. If the desaturation could be compensated by increasing density, color densities should be increased by 8-11%. It might cause invalid tvi values, and that should be compensated in prepress.
After all, the final result is not the same if you increase density on varnish job vs leaving the varnish away.
Matt varnish desaturates, and that is what it is for.

-----------------------------------------------
Kind regards:
Jani Vauhkonen
Prepress manager

PunaMusta Oy
PrePress division
P.O.Box 99, FIN-80141 Joensuu
Kosti Aaltosen tie 9, FIN-80140 Joensuu
Tel. +358 10 230 8481
jani.vauhkonen@punamusta.com
www.punamusta.com
-----------------------------------------------






eci-en-request@lists.callassoftware.com kirjoitti 3.4.2012 kello 13.00:

Send ECI-EN mailing list submissions to
eci-en@lists.callassoftware.com

To subscribe or unsubscribe via the World Wide Web, visit
http://lists.callassoftware.com/mailman/listinfo/eci-en
or, via email, send a message with subject or body 'help' to
eci-en-request@lists.callassoftware.com

You can reach the person managing the list at
eci-en-owner@lists.callassoftware.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of ECI-EN digest..."


Today's Topics:

 1. Aqueous Coating and Lab targets (Juris Valdmanis)


----------------------------------------------------------------------

Message: 1
Date: Tue, 3 Apr 2012 11:53:18 +0300
From: Juris Valdmanis <bebris@jt.lv>
Subject: [ECI-EN] Aqueous Coating and Lab targets
To: eci-en@lists.callassoftware.com
Message-ID:
<OF8C378713.072110F8-ONC22579D5.0030AFAC-C22579D5.0030D38F@jt.lv>
Content-Type: text/plain; charset="us-ascii"

An HTML attachment was scrubbed...
URL: http://lists.callassoftware.com/pipermail/eci-en/attachments/20120403/5b0f8968/attachment-0001.html

------------------------------

_______________________________________________
ECI-EN mailing list
ECI-EN@lists.callassoftware.com
http://lists.callassoftware.com/mailman/listinfo/eci-en

End of ECI-EN Digest, Vol 56, Issue 1
*************************************
_______________________________________________
ECI-EN mailing list
ECI-EN@lists.callassoftware.com
http://lists.callassoftware.com/mailman/listinfo/eci-en