Peter Kleinheider wrote:
"So if you want your black areas in an rgb image to become an heavy
black cmyk area with 330 % ink coverage (with 95% black), then you can
get it with such a profile. But you would not get 95% black if this was
already set the max-K value in the profile."

OK. It seems that I've misunderstood the way conversion is done.I allways thought

that the darkest area in the RGB image was mapped to the highest CMYK value that was specified in the profile.

It seems that this is not right.

Thanks for the information.

Best regards.

Jon A Sandholt